Sharp Aquos LC-20B8U Manuel d'utilisation - Page 39
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Aquos LC-20B8U. Sharp Aquos LC-20B8U 45 pages. Sharp operation manual liquid crystal television lc-20b8u
Imprimer la page
Troubleshooting
■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
Problem
Picture
Sound
Picture
Remote control does not work.
The clock (AUTO CLOCK)
cannot be set.
Unit cannot be operated.
38
• Make sure the AC cord is properly inserted in the power
outlet.
There is no
• Reception other than those of broadcasting stations can
picture or
be considered.
sound.
• Make sure the input mode is set to TV.
• Make sure the POWER switch of the main unit is on.
There is no
• Make sure the BRIGHTNESS is properly adjusted.
picture.
• Fluorescent lamp may have reached the end of service
There is no
life.
picture from
• Make sure the S-VIDEO terminal has nothing connected.
INPUT1/2/3/4.
• Make sure the AUDIO ONLY is not set to ON.
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
There is no
• Make sure that headphones are not connected.
sound.
• Make sure the antenna cable is properly connected.
There is no
• Bad reception could be the problem.
picture or
sound, just
noise.
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
Picture is
not clear.
• Check color adjustment.
Picture is
• Check COLOR SYSTEM setting.
light or
improperly
tinted.
• Press the BACKLIGHT button or set the BACKLIGHT or
BRIGHTNESS settings.
The picture
• Check CONTRAST and BRIGHTNESS adjustment.
is too dark.
• Fluorescent lamp may have reached the end of service
life.
• Check the batteries of the remote control.
• Make sure the remote sensor window is not in strong
lighting.
• The broadcasted EDS signal may be weak. Check the
antenna.
• Carry out EZ SETUP or Setting the CLOCK again.
• If EDS signal is not sent, set the clock using MANUAL
CLOCK Setting.
• External influences such as lightning, static electricity,
etc., may cause improper operation. In this case, operate
the unit after first turning the power off, or unplugging the
AC cord and re-plugging it in 1 or 2 minutes.
Check item
Reference page
9
–
16
15
20
40
37
30
16
16
10
8, 9
–
8, 9
–
20, 21
24
20
20
40
7
7
–
13, 14, 23
14
–