Sharp MX-2300N Guide Manuel de dépannage - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Sharp MX-2300N Guide. Sharp MX-2300N Guide 44 pages. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Également pour Sharp MX-2300N Guide : Spécifications (2 pages), Manuel de sécurité (28 pages), Manuel de classement des documents (47 pages), Instructions pour la numérisation vers le courrier électronique (7 pages), Manuel de configuration du logiciel (48 pages)

Sharp MX-2300N Guide Manuel de dépannage
Problem
JPEG was selected for
the file type but the file
was created as a TIFF
file.
The image is too light
or too dark.
(When using PC
Scan.)
20
Point to check
Did you press the [BLACK & WHITE
START] key (
) to begin scanning?
Is the threshold value suitable?
Are the brightness and contrast settings
suitable?
Solution
When [JPEG] is selected for the file type and the image
is scanned in Mono 2, the file will be created as a TIFF
file. To create the file as a JPEG file, change the colour
mode to [Full Colour] and then press the [COLOUR
START] key (
).
When scanning from the TWAIN driver with [Mono 2
gradation] selected from the [Colour Mode] of the
"Professional" window, check the "B/W Threshold"
setting. A large threshold value makes the image darker
and a small threshold value makes the image brighter.
To adjust the "B/W Threshold" automatically, click the
[Auto Threshold] button on the [Image] tab of the
"Professional" window.
When the brightness and contrast settings are not
suitable (for example, the scanned image is too bright),
click the [Auto Brightness / Contrast Adjustment] button
on the [Colour] tab of the "Professional" window. You
can also click the [Brightness / Contrast] button to set
the brightness and contrast while viewing the scanned
image.