Sharp MX-2300N Guide Handleiding voor probleemoplossing - Pagina 22

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Sharp MX-2300N Guide. Sharp MX-2300N Guide 44 pagina's. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Ook voor Sharp MX-2300N Guide: Specificaties (2 pagina's), Veiligheidshandboek (28 pagina's), Handleiding voor het indienen van documenten (47 pagina's), Instructies voor scannen naar e-mail (7 pagina's), Software-instelhandleiding (48 pagina's)

Problem

JPEG was selected for

the file type but the file

was created as a TIFF

file.

The image is too light

or too dark.

(When using PC

Scan.)

Point to check

Did you press the [BLACK & WHITE

START] key (

) to begin scanning?

Is the threshold value suitable?

Are the brightness and contrast settings

suitable?

Solution

When [JPEG] is selected for the file type and the image

is scanned in Mono 2, the file will be created as a TIFF

file. To create the file as a JPEG file, change the colour

mode to [Full Colour] and then press the [COLOUR

START] key (

When scanning from the TWAIN driver with [Mono 2

gradation] selected from the [Colour Mode] of the

"Professional" window, check the "B/W Threshold"

setting. A large threshold value makes the image darker

and a small threshold value makes the image brighter.

To adjust the "B/W Threshold" automatically, click the

[Auto Threshold] button on the [Image] tab of the

"Professional" window.

When the brightness and contrast settings are not

suitable (for example, the scanned image is too bright),

click the [Auto Brightness / Contrast Adjustment] button

on the [Colour] tab of the "Professional" window. You

can also click the [Brightness / Contrast] button to set

the brightness and contrast while viewing the scanned

image.