Sharp MX-2300N Guide Panduan Pemecahan Masalah - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Semua dalam Satu Printer Sharp MX-2300N Guide. Sharp MX-2300N Guide 44 halaman. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Juga untuk Sharp MX-2300N Guide: Spesifikasi (2 halaman), Panduan Keselamatan (28 halaman), Manual Pengarsipan Dokumen (47 halaman), Petunjuk Pindai ke Email (7 halaman), Panduan Pengaturan Perangkat Lunak (48 halaman)

Problem

JPEG was selected for

the file type but the file

was created as a TIFF

file.

The image is too light

or too dark.

(When using PC

Scan.)

Point to check

Did you press the [BLACK & WHITE

START] key (

) to begin scanning?

Is the threshold value suitable?

Are the brightness and contrast settings

suitable?

Solution

When [JPEG] is selected for the file type and the image

is scanned in Mono 2, the file will be created as a TIFF

file. To create the file as a JPEG file, change the colour

mode to [Full Colour] and then press the [COLOUR

START] key (

When scanning from the TWAIN driver with [Mono 2

gradation] selected from the [Colour Mode] of the

"Professional" window, check the "B/W Threshold"

setting. A large threshold value makes the image darker

and a small threshold value makes the image brighter.

To adjust the "B/W Threshold" automatically, click the

[Auto Threshold] button on the [Image] tab of the

"Professional" window.

When the brightness and contrast settings are not

suitable (for example, the scanned image is too bright),

click the [Auto Brightness / Contrast Adjustment] button

on the [Colour] tab of the "Professional" window. You

can also click the [Brightness / Contrast] button to set

the brightness and contrast while viewing the scanned

image.