Shimano PD-GR50 Manuel du distributeur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel du distributeur pour {nom_de_la_catégorie} Shimano PD-GR50. Shimano PD-GR50 19 pages. Flat pedal
![Shimano PD-GR50 Manuel du distributeur](/uploads/products/server2/5080401/5080401.jpg)
MAINTENANCE
Axle unit
Remove old grease and apply an appropriate amount of new grease to the bottom of the
4
pedal body.
• Apply grease to the extent that it does not flow out when the axle is set into the pedal
(about 1.5 g).
Insert the axle unit into the pedal, then tighten the lock bush.
5
PD-M8040/PD-M828
1
PD-M8040
Use the Shimano original tool TL-PD63 or TL-PD33, or 7 mm and 10 mm spanners to turn the
2
cone (10 mm) to adjust the rotation.
PD-M828
Use 7 mm and 8 mm spanners to turn the cone (8 mm) to adjust the rotation.
To be continued on next page
Use Shimano original tool TL-PD40 to
loosen the lock bush and pull out the
axle unit.
• The right pedal has a left-hand thread;
the left pedal has a right-hand thread.
15
Tightening torque
10 - 12 N·m