Shimano PD-GR50 딜러 매뉴얼 - 페이지 15

{카테고리_이름} Shimano PD-GR50에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano PD-GR50 19 페이지. Flat pedal

MAINTENANCE

Axle unit

Remove old grease and apply an appropriate amount of new grease to the bottom of the

pedal body.

• Apply grease to the extent that it does not flow out when the axle is set into the pedal

(about 1.5 g).

Insert the axle unit into the pedal, then tighten the lock bush.

PD-M8040/PD-M828

PD-M8040

Use the Shimano original tool TL-PD63 or TL-PD33, or 7 mm and 10 mm spanners to turn the

cone (10 mm) to adjust the rotation.

PD-M828

Use 7 mm and 8 mm spanners to turn the cone (8 mm) to adjust the rotation.

To be continued on next page

Use Shimano original tool TL-PD40 to

loosen the lock bush and pull out the

axle unit.

• The right pedal has a left-hand thread;

the left pedal has a right-hand thread.

Tightening torque

10 - 12 N·m