- ページ 15

ミュージックペダル Shimano PD-GR50のPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Shimano PD-GR50 19 ページ。 Flat pedal

ページを印刷する
Shimano PD-GR50 ディーラーズマニュアル
MAINTENANCE
Axle unit
Remove old grease and apply an appropriate amount of new grease to the bottom of the
4
pedal body.
• Apply grease to the extent that it does not flow out when the axle is set into the pedal
(about 1.5 g).
Insert the axle unit into the pedal, then tighten the lock bush.
5
PD-M8040/PD-M828
1
PD-M8040
Use the Shimano original tool TL-PD63 or TL-PD33, or 7 mm and 10 mm spanners to turn the
2
cone (10 mm) to adjust the rotation.
PD-M828
Use 7 mm and 8 mm spanners to turn the cone (8 mm) to adjust the rotation.
To be continued on next page
Use Shimano original tool TL-PD40 to
loosen the lock bush and pull out the
axle unit.
• The right pedal has a left-hand thread;
the left pedal has a right-hand thread.
15
Tightening torque
10 - 12 N·m