Digital Audio Labs LIVEMIX MIX-16 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digital Audio Labs LIVEMIX MIX-16. Digital Audio Labs LIVEMIX MIX-16 15 pages. Central mixer and power distributor
Également pour Digital Audio Labs LIVEMIX MIX-16 : Manuel de l'utilisateur (15 pages)
SETUP AND OPERATION
Although the MIX-16/MIX-32 is the Livemix central mixer
and power distributor, there aren't any direct controls.
Setting up the MIX-16/MIX-32 is simple and all configuration
is done on a Livemix personal mixer (See the CS-SOLO or
CS-DUO User Guide).
1. If using the analog input, connect the Livemix Data
Out port on the AD-24 to the Livemix Data In port on
the MIX-16/MIX-32. Shielded CAT5e or CAT6 cable is
required to make this connection. If using an option
card, you will not use the Livemix Data In port.
2. Connect each personal mixer to a Control Surface Port
on the front of the MIX-16/MIX-32 with a CAT5e or CAT6
cable. These do not have to be in any particular order
or sequence. Planning which Livemix personal mixer
goes into which Control Surface Port may help identify
each personal mixer when using the MirrorMix
mixing feature.
3. Connect the power supply on the back of the MIX-16/
MIX-32 to an appropriate power source.
4. Turn on the MIX-16/MIX-32.
LIVEMIX MIX-16/32
NOTE:
The audio data sent over the
Livemix system is a proprietary
data format. It will not work with
a switch or a standard Ethernet
network. When using an Option
Card designed for networked
audio use, such as the LM-DANTE-
EXP, consult the Option Card user
guide for information on how to
connect to the network.
NOTE:
Either CAT5e or CAT6 cabling is
appropriate.
®
remote
7