Digital Audio Labs LIVEMIX MIX-16 사용자 설명서 - 페이지 9

{카테고리_이름} Digital Audio Labs LIVEMIX MIX-16에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Audio Labs LIVEMIX MIX-16 15 페이지. Central mixer and power distributor
Digital Audio Labs LIVEMIX MIX-16에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄

1. Setup and Operation

SETUP AND OPERATION

Although the MIX-16/MIX-32 is the Livemix central mixer

and power distributor, there aren't any direct controls.

Setting up the MIX-16/MIX-32 is simple and all configuration

is done on a Livemix personal mixer (See the CS-SOLO or

CS-DUO User Guide).

1. If using the analog input, connect the Livemix Data

Out port on the AD-24 to the Livemix Data In port on

the MIX-16/MIX-32. Shielded CAT5e or CAT6 cable is

required to make this connection. If using an option

card, you will not use the Livemix Data In port.

2. Connect each personal mixer to a Control Surface Port

on the front of the MIX-16/MIX-32 with a CAT5e or CAT6

cable. These do not have to be in any particular order

or sequence. Planning which Livemix personal mixer

goes into which Control Surface Port may help identify

each personal mixer when using the MirrorMix

mixing feature.

3. Connect the power supply on the back of the MIX-16/

MIX-32 to an appropriate power source.

4. Turn on the MIX-16/MIX-32.

LIVEMIX MIX-16/32

NOTE:

The audio data sent over the

Livemix system is a proprietary

data format. It will not work with

a switch or a standard Ethernet

network. When using an Option

Card designed for networked

audio use, such as the LM-DANTE-

EXP, consult the Option Card user

guide for information on how to

connect to the network.

NOTE:

Either CAT5e or CAT6 cabling is

appropriate.

remote