Digital Audio Labs LIVEMIX MIX-16 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Міксер Digital Audio Labs LIVEMIX MIX-16. Digital Audio Labs LIVEMIX MIX-16 15 сторінок. Central mixer and power distributor
Також для Digital Audio Labs LIVEMIX MIX-16: Посібник користувача (15 сторінок)

Друкувати сторінку

1. Setup and Operation

SETUP AND OPERATION

Although the MIX-16/MIX-32 is the Livemix central mixer

and power distributor, there aren't any direct controls.

Setting up the MIX-16/MIX-32 is simple and all configuration

is done on a Livemix personal mixer (See the CS-SOLO or

CS-DUO User Guide).

1. If using the analog input, connect the Livemix Data

Out port on the AD-24 to the Livemix Data In port on

the MIX-16/MIX-32. Shielded CAT5e or CAT6 cable is

required to make this connection. If using an option

card, you will not use the Livemix Data In port.

2. Connect each personal mixer to a Control Surface Port

on the front of the MIX-16/MIX-32 with a CAT5e or CAT6

cable. These do not have to be in any particular order

or sequence. Planning which Livemix personal mixer

goes into which Control Surface Port may help identify

each personal mixer when using the MirrorMix

mixing feature.

3. Connect the power supply on the back of the MIX-16/

MIX-32 to an appropriate power source.

4. Turn on the MIX-16/MIX-32.

LIVEMIX MIX-16/32

NOTE:

The audio data sent over the

Livemix system is a proprietary

data format. It will not work with

a switch or a standard Ethernet

network. When using an Option

Card designed for networked

audio use, such as the LM-DANTE-

EXP, consult the Option Card user

guide for information on how to

connect to the network.

NOTE:

Either CAT5e or CAT6 cabling is

appropriate.

remote