Siemens SIMATIC ET 200SP Manuel de l'équipement - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 44 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

Parameters/address space

4.3 Parameter setting

4.3

Parameter setting

You can use various parameters to define the properties of the communications module.

Depending on the settings, not all parameters are available.

You set the parameters of the module as follows:

Parameter setting via ...

Hardware configuration in STEP 7

(TIA Portal)

Hardware configuration using GSD

file for distributed operation on

the PROFINET IO

Hardware configuration using GSD

file for distributed operation on

the PROFIBUS DP

Basic procedure

1. Insert the module from the hardware catalog under "Communications modules".

2. Set the parameters of the module in the hardware configuration.

3. Download the project to the CPU.

1. Install the latest PROFINET GSD file.

You will then find the module in the hardware catalog under "Other field devices >

PROFINET IO > I/O".

2. Set the parameters in the hardware configuration.

3. Download the project to the CPU.

1. Install the latest PROFIBUS GSD file.

You will then find the module in the hardware catalog under "Other field devices >

PROFIBUS DP > I/O".

2. Set the parameters in the hardware configuration.

Only the parameters marked with

PROFIBUS GSD file.

3. Download the project to the CPU.

The parameters that are not marked with

with their default setting.

4. If necessary, set the parameters not marked with

corresponding data records.

in the following table can be set in the

in the following table are downloaded

in the user program using the

CM PtP communications module (6ES7137-6AA01-0BA0)

Equipment Manual, 03/2021, A5E03790792-01