Siemens SIMATIC ET 200SP Panduan Peralatan - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Peralatan untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 44 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Parameters/address space

4.3 Parameter setting

4.3

Parameter setting

You can use various parameters to define the properties of the communications module.

Depending on the settings, not all parameters are available.

You set the parameters of the module as follows:

Parameter setting via ...

Hardware configuration in STEP 7

(TIA Portal)

Hardware configuration using GSD

file for distributed operation on

the PROFINET IO

Hardware configuration using GSD

file for distributed operation on

the PROFIBUS DP

Basic procedure

1. Insert the module from the hardware catalog under "Communications modules".

2. Set the parameters of the module in the hardware configuration.

3. Download the project to the CPU.

1. Install the latest PROFINET GSD file.

You will then find the module in the hardware catalog under "Other field devices >

PROFINET IO > I/O".

2. Set the parameters in the hardware configuration.

3. Download the project to the CPU.

1. Install the latest PROFIBUS GSD file.

You will then find the module in the hardware catalog under "Other field devices >

PROFIBUS DP > I/O".

2. Set the parameters in the hardware configuration.

Only the parameters marked with

PROFIBUS GSD file.

3. Download the project to the CPU.

The parameters that are not marked with

with their default setting.

4. If necessary, set the parameters not marked with

corresponding data records.

in the following table can be set in the

in the following table are downloaded

in the user program using the

CM PtP communications module (6ES7137-6AA01-0BA0)

Equipment Manual, 03/2021, A5E03790792-01