Siemens SINAMICS G120P VSD Manuel de démarrage - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Siemens SINAMICS G120P VSD. Siemens SINAMICS G120P VSD 50 pages.
Imprimer la page
Motor speed
Sets the value of the motor speed in RPM taken from the motor
rating plate.
1. Press
to modify the parameter value.
2. Using the
and
decrease the displayed value.
3. Press
to confirm the selected value. The display will
automatically display the next parameter in the commissioning
sequence.
Motor identification
Sets the motor data identification and speed controller optimization.
1. Press
to modify the parameter value.
2. Using the
and
until the required setting is visible.
3. Press
to confirm the selected value. The display will
automatically display the next parameter in the commissioning
sequence.
Motor identification will not start until the basic commissioning
sequence has been completed.
Macro Parameter
Skip over the MAc PAr option. This is a Macro parameter for
automatically setting the basic interface I/O, and normally
would not need to be changed, so leave P15 = 12.
Minimum RPM
Sets the lowest speed to which the motor operates independently of
the frequency setpoint.
1. Press
to modify the parameter value.
2. Using the
and
decrease the displayed value.
3. Press
to confirm the selected value. The display will
automatically display the next parameter in the commissioning
sequence.
Page 24 of 50
keys (or digit-by-digit method) increase or
keys to scroll through the various options
keys (or digit-by-digit method) increase or
Building Technologies
Last Revised: 4/11/2011