Cisco 3905 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco 3905. Cisco 3905 16 pages. Cisco systems telephone user manual
Également pour Cisco 3905 : Manuel de l'utilisateur (14 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (2 pages), Manuel de l'utilisateur (3 pages), Caractéristiques (6 pages), Manuel de l'utilisateur (40 pages), Caractéristiques (11 pages), Manuel de l'utilisateur (36 pages), Manuel de référence rapide (2 pages), Utilisation du manuel (16 pages), Manuel de l'utilisateur (2 pages), (portugais) Manuel de démarrage rapide (1 pages)

3001736-EFC21-EFC25-UK

2. Installation

The control panel must be fitted onto a level surface with a minimum distance of 100 mm to any

corner.

The front cover is removed from the frame by twisting a screwdriver in the two holes on the sides

of the cover. The front cover can then be tipped carefully and the frame can be fitted onto the wall.

Fig. 3

NB:

The front cover is fitted with connection cable on the right side which limits how much this side

can be opened.

The controller covers a standard dry lining box (80 x 80 mm).

When fitting an external IR receiver avoid bending the black part of the cable

(EFC25 accessory)(Fig. 4).

Fig. 4

• All installations must be carried out by competent personnel in accordance with

national legislation and regulations.

• An isolation switch must be installed between the controller and the chimney fan.

• Refer to the chimney fan instruction when installing the isolation switch.

• The isolation switch must be ordered separately as it is not part of the

standard exodraft delivery.

• Do not connect SMG terminals 6 and 7 to any valve other than an SMG valve supplied

by exodraft.

Fig. 5

• Electrical wiring of the controller must be carried out in accordance with national

legislation and regulations.

• Earth must always be connected.

110

UK 5