Siemens SITRANS RD500 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SITRANS RD500. Siemens SITRANS RD500 11 pages. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Également pour Siemens SITRANS RD500 : Manuel d'utilisation (48 pages), Manuel d'utilisation (8 pages), Manuel d'utilisation (8 pages), Manuel d'utilisation (8 pages), Manuel d'application (6 pages), Exemples d'application (9 pages)

Imprimer la page
Siemens SITRANS RD500 Manuel
Planning/configuring

3.3 Configuring RD500 to Read MODBUS Registers from MultiRanger

3.3
Configuring RD500 to Read MODBUS Registers from MultiRanger
1. Click on I/O > MODBUS: you should see the screen below.
2. In the RS485 Port section, set the Baud Rate to 19200, as shown above.
3. Click on the checkbox to enable a MODBUS device, and then enter a Name, e.g. MultiRanger
100. Set Node to 1 and click on Apply. (Another MODBUS device entry will appear below
the first one.)
– Be sure all serial communication settings are the same on both the RD500 and the
– Parameter P772 controls the baud rate of the MultiRanger. Be sure to select Port 2 for
4. Click on Configure to open the device node page for the MultiRanger, shown below.
8
MultiRanger (Baud, data bits, stop bits and parity).
RS485.
Configuring SITRANS RD500 for connection to MultiRanger with MODBUS RTU
Application examples, 09/2020, AG111710