Siemens ED8 FS11E Series Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens ED8 FS11E Series. Siemens ED8 FS11E Series 36 pages. Induction hob with integrated ventilation system

Imprimer la page

Before using for the first time

Air recirculation mode

The air that is drawn in is cleaned by the

grease filters and an activated carbon filter

and conveyed back into the kitchen.

To bind odours in air recirculation mode, you

Note:

must install an activated carbon filter. The different

options for operating the appliance in air recirculation

mode can be found in the brochure. Alternatively, ask

your specialist dealer. The required accessories are

available from specialist retailers, from our after-sales

service or from our online shop.

KBefore using for the first

time

P lease read the following information before using the

B e f o r e u s i n g f o r t h e f i r s t t i m e

appliance for the first time:

Clean the appliance and all accessory parts thoroughly.

Before you can use your new appliance, you must apply

certain settings.

Initial use

When it is delivered, the appliance is preset to air

Note:

recirculation mode.

Possible settings:

In air recirculation mode, if

■

value

(factory setting) is set.

‹

In air extraction mode, if

■

is set.

‚

To switch the appliance to air extraction mode, see

~ "Basic settings" on page 21.

is displayed, the

'‚ˆ

is displayed, the value

'‚ˆ

1Operating the appliance

T his chapter explains how to set a hotplate. The table

O p e r a t i n g t h e a p p l i a n c e

shows heat settings and cooking times for various

meals.

Warning – Risk of burns!

The filter cover will get very hot very quickly if left on the

hob. Never place the filter cover on the hob.Do not

place pots, pans or other hot objects on the filter cover.

Switch on the ventilation system when you start

Note:

cooking and switch it off again a few minutes after you

have finished cooking. This is the most effective way of

removing steam from the kitchen.

Never use the appliance without the container,

Note:

metal grease filter or filter cover.

Switching the hob on and off

The main switch is used to switch the hob on and off.

To switch the hob on: Touch the

signal will sound. The indicator above the main switch

and the hotplate indicators

ready to use.

To switch the hob off: Touch the

indicator goes out.All hotplates are now off. The

residual heat indicator will remain lit until the hotplates

have cooled down sufficiently.

Notes

The hob will automatically switch itself off if all

■

hotplates have been switched off for more than

30 seconds and the ventilation system is off.

The selected settings are stored for 4 seconds after

■

the hob has been switched off. If you switch it back

on during this time, the hob will operate using the

stored settings.

Setting the hotplate

The desired power level is set in the programming

panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is

marked with a dot.

Notes

To protect the fragile parts of your appliance from

■

overheating and electrical overloading, the hob may

temporarily reduce the power.

In order to prevent the appliance from producing

■

excess noise, the hob may temporarily reduce the

power.

symbol. An audible

will light up. The hob is

‹

symbol until the