Siemens ED8 FS11E Series Manuel d'instruction - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens ED8 FS11E Series. Siemens ED8 FS11E Series 36 pages. Induction hob with integrated ventilation system

Imprimer la page

Childproof lock

AChildproof lock

Y ou can use the childproof lock to prevent children

C h i l d p r o o f l o c k

from switching on the hob.

Activating and deactivating the childproof

lock

The hob should be turned off.

To activate: press the symbol

4 seconds. The indicator next to the symbol

up for 10 seconds. The hob is locked.

To deactivate: press the symbol

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically

activates when a hob is switched off.

Switching on and off

You can find out how to switch the automatic childproof

lock on in the ~ "Basic settings" section

kWipe protection

I f you wipe over the control panel while the hob is

W i p e p r o t e c t i o n

switched on, settings may be altered. To avoid doing

this, you can use the hob's "Lock control panel for

cleaning" function.

To activate: Touch the

sounds. The control panel is locked for 35 seconds.

You can now wipe over the surface of the control panel

without altering any settings.

To deactivate: The control panel will be unlocked once

35 seconds have elapsed. To release the function early,

touch the

symbol.

Notes

An audible signal sounds 30 seconds after

■

activation. This indicates that the function is about to

finish.

The cleaning lock does not lock the main switch. The

■

hob can be switched off at any time.

‚

for approximately

lights

‚

for approximately

‚

symbol. An audible signal

bAutomatic safety cut-out

I f a hotplate operates for an extended period and no

A u t o m a t i c s a f e t y c u t - o u t

settings are changed, the automatic safety shut-off is

activated.

The hotplate stops heating.

indicator

flash alternately in the hotplate display.

•

When you touch any symbol, the display switches off.

The hotplate can now be set again.

The point at which the safety shut-off becomes active

depends on which heat setting has been set (after 1 to

10 hours).

‰

and the residual heat