Siemens ED8 FS11E Series Instruction Manual - Page 20

Browse online or download pdf Instruction Manual for Hob Siemens ED8 FS11E Series. Siemens ED8 FS11E Series 36 pages. Induction hob with integrated ventilation system

Print Page

Childproof lock

AChildproof lock

Y ou can use the childproof lock to prevent children

C h i l d p r o o f l o c k

from switching on the hob.

Activating and deactivating the childproof

lock

The hob should be turned off.

To activate: press the symbol

4 seconds. The indicator next to the symbol

up for 10 seconds. The hob is locked.

To deactivate: press the symbol

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically

activates when a hob is switched off.

Switching on and off

You can find out how to switch the automatic childproof

lock on in the ~ "Basic settings" section

kWipe protection

I f you wipe over the control panel while the hob is

W i p e p r o t e c t i o n

switched on, settings may be altered. To avoid doing

this, you can use the hob's "Lock control panel for

cleaning" function.

To activate: Touch the

sounds. The control panel is locked for 35 seconds.

You can now wipe over the surface of the control panel

without altering any settings.

To deactivate: The control panel will be unlocked once

35 seconds have elapsed. To release the function early,

touch the

symbol.

Notes

An audible signal sounds 30 seconds after

■

activation. This indicates that the function is about to

finish.

The cleaning lock does not lock the main switch. The

■

hob can be switched off at any time.

‚

for approximately

lights

‚

for approximately

‚

symbol. An audible signal

bAutomatic safety cut-out

I f a hotplate operates for an extended period and no

A u t o m a t i c s a f e t y c u t - o u t

settings are changed, the automatic safety shut-off is

activated.

The hotplate stops heating.

indicator

flash alternately in the hotplate display.

•

When you touch any symbol, the display switches off.

The hotplate can now be set again.

The point at which the safety shut-off becomes active

depends on which heat setting has been set (after 1 to

10 hours).

‰

and the residual heat