Siemens ED8 FS11E Series Руководство по эксплуатации - Страница 20
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Siemens ED8 FS11E Series. Siemens ED8 FS11E Series 36 страниц. Induction hob with integrated ventilation system
Childproof lock
en
AChildproof lock
Y ou can use the childproof lock to prevent children
C h i l d p r o o f l o c k
from switching on the hob.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
4 seconds. The indicator next to the symbol
up for 10 seconds. The hob is locked.
To deactivate: press the symbol
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
kWipe protection
I f you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be altered. To avoid doing
this, you can use the hob's "Lock control panel for
cleaning" function.
To activate: Touch the
Ñ
sounds. The control panel is locked for 35 seconds.
You can now wipe over the surface of the control panel
without altering any settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. To release the function early,
touch the
Ñ
symbol.
Notes
An audible signal sounds 30 seconds after
■
activation. This indicates that the function is about to
finish.
The cleaning lock does not lock the main switch. The
■
hob can be switched off at any time.
20
‚
for approximately
lights
‚
for approximately
‚
symbol. An audible signal
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator
or
flash alternately in the hotplate display.
œ
•
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).
"
,
‰
and the residual heat