Epson ELP-3300 - Data/Video Projector Informations sur le produit - Page 2

Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson ELP-3300 - Data/Video Projector. Epson ELP-3300 - Data/Video Projector 2 pages. Product support bulletin(s)
Également pour Epson ELP-3300 - Data/Video Projector : Installation facile (1 pages), Manuel de l'utilisateur (1 pages), Fiche technique (7 pages), Bulletin d'information sur les produits (9 pages), Spécifications (1 pages)

EPSON ELP-3300 Data/Video Projector

Status Lights

The status lights at the top of the projector monitor its

operation.

temperature light 1

lamp light

To reset the lamp indicator after replacing the bulb, turn off

the projector, hold the 'Menu" and 'Sync-" buttons down

then turn the power switch back on. Continue to hold the

buttons down until all three monitor lights flash orange for

about 3 seconds. The lamp dectector is now reset.

Pin Assignments

The following tables describe the pin assignments for the

three connectors of the Y-cable: the LCD connector, the VGA

connector, and the Monitor connector. The pin assignments

for the VGA and Monitor connectors are identical.

LCD connector pin assignments

The LCD connector is a 26-pin D-style connector. Its pin

assignments are as follows:

ELP-3300 - 2

power light

VGA and Monitor connector Pin assignments

The VGA connector is a male video RGB, 15-pin micro-D

style connector, and the Monitor connector is a female video

RGB, 15-pin micro-D style connector. The pm assignments