Ricoh S7 D3DS Manuel du service extérieur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel du service extérieur pour {nom_de_la_catégorie} Ricoh S7 D3DS. Ricoh S7 D3DS 23 pages. Double-feed kit
Imprimer la page
6.
Release the shielded harnesses at the front [A] and rear [B].
7.
Remove the original shielded harnesses.
Install the Double-feed Sensors
•
You will need a short screwdriver to fasten the double-feed sensor board.
1.
Gather these items from the kit accessories.
[A] Double-feed sensor board
[B] Shielded harnesses
[C] Short harness (13-pin)
[D] Long harness (2-pin)
2.
Connect the harnesses to the board [A].
3.
Clamp the harnesses at [B].
1.Install
9