Ricoh S7 D3DS Handbuch für den Außendienst - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für den Außendienst für Drucker-Zubehör Ricoh S7 D3DS herunter. Ricoh S7 D3DS 23 Seiten. Double-feed kit
Seite drucken
6.
Release the shielded harnesses at the front [A] and rear [B].
7.
Remove the original shielded harnesses.
Install the Double-feed Sensors
•
You will need a short screwdriver to fasten the double-feed sensor board.
1.
Gather these items from the kit accessories.
[A] Double-feed sensor board
[B] Shielded harnesses
[C] Short harness (13-pin)
[D] Long harness (2-pin)
2.
Connect the harnesses to the board [A].
3.
Clamp the harnesses at [B].
1.Install
9