Ricoh S7 D3DS 현장 서비스 매뉴얼 - 페이지 11
{카테고리_이름} Ricoh S7 D3DS에 대한 현장 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh S7 D3DS 23 페이지. Double-feed kit
페이지 인쇄
6.
Release the shielded harnesses at the front [A] and rear [B].
7.
Remove the original shielded harnesses.
Install the Double-feed Sensors
•
You will need a short screwdriver to fasten the double-feed sensor board.
1.
Gather these items from the kit accessories.
[A] Double-feed sensor board
[B] Shielded harnesses
[C] Short harness (13-pin)
[D] Long harness (2-pin)
2.
Connect the harnesses to the board [A].
3.
Clamp the harnesses at [B].
1.Install
9