Ricoh S7 D3DS Handbuch für den Außendienst - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für den Außendienst für Drucker-Zubehör Ricoh S7 D3DS herunter. Ricoh S7 D3DS 23 Seiten. Double-feed kit

Ricoh S7 D3DS Handbuch für den Außendienst
1.Install
4.
Make sure there is no slack in the harness cables between their connectors and the clamp.
5.
At the back of the machine, set the double-feed sensor board below the edge of the ADF control board, and then
use a short screwdriver to fasten the sensor board.
6.
Connect the end of the short harness to the ADF control board [A].
7.
Gather the long harnesses [B] away from the back of the machine.
8.
At the back of the ADF, working from the left, open and close each clamp over both harnesses. Make sure that
10