Ricoh S7 D3DS Manuale di servizio sul campo - Pagina 12

Sfoglia online o scarica il pdf Manuale di servizio sul campo per Accessori per stampanti Ricoh S7 D3DS. Ricoh S7 D3DS 23. Double-feed kit

Ricoh S7 D3DS Manuale di servizio sul campo
1.Install
4.
Make sure there is no slack in the harness cables between their connectors and the clamp.
5.
At the back of the machine, set the double-feed sensor board below the edge of the ADF control board, and then
use a short screwdriver to fasten the sensor board.
6.
Connect the end of the short harness to the ADF control board [A].
7.
Gather the long harnesses [B] away from the back of the machine.
8.
At the back of the ADF, working from the left, open and close each clamp over both harnesses. Make sure that
10