Ricoh S7 D3DS Field Service Manual - Page 12
Browse online or download pdf Field Service Manual for Printer Accessories Ricoh S7 D3DS. Ricoh S7 D3DS 23 pages. Double-feed kit
Print Page
1.Install
4.
Make sure there is no slack in the harness cables between their connectors and the clamp.
5.
At the back of the machine, set the double-feed sensor board below the edge of the ADF control board, and then
use a short screwdriver to fasten the sensor board.
6.
Connect the end of the short harness to the ADF control board [A].
7.
Gather the long harnesses [B] away from the back of the machine.
8.
At the back of the ADF, working from the left, open and close each clamp over both harnesses. Make sure that
10