Ricoh S7 D3DS Handleiding voor buitendienst - Pagina 12

Blader online of download pdf Handleiding voor buitendienst voor {categorie_naam} Ricoh S7 D3DS. Ricoh S7 D3DS 23 pagina's. Double-feed kit

1.Install

Make sure there is no slack in the harness cables between their connectors and the clamp.

At the back of the machine, set the double-feed sensor board below the edge of the ADF control board, and then

use a short screwdriver to fasten the sensor board.

Connect the end of the short harness to the ADF control board [A].

Gather the long harnesses [B] away from the back of the machine.

At the back of the ADF, working from the left, open and close each clamp over both harnesses. Make sure that