Ricoh S7 D3DS Handbuch für den Außendienst - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch für den Außendienst für Drucker-Zubehör Ricoh S7 D3DS herunter. Ricoh S7 D3DS 23 Seiten. Double-feed kit
Seite drucken
1.Install
12. Hold double-feed sensor 1 as shown [A], and then connect the harness.
13. Insert the blade of the bracket [B] into the slot.
14. Fasten the sensor bracket [A], and then close the clamp.
15. Thread the harness through the three clamps [B] and then close them.
16. Set the upper guide as shown, and then gather these items from the accessories.
[A] Shielded harnesses
[B] Double-feed sensor 2
[C] Screws (M3x8)
17. Connect the harness to the sensor board [A].
12