Ricoh S7 D3DS 현장 서비스 매뉴얼 - 페이지 14

{카테고리_이름} Ricoh S7 D3DS에 대한 현장 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh S7 D3DS 23 페이지. Double-feed kit

1.Install

12. Hold double-feed sensor 1 as shown [A], and then connect the harness.

13. Insert the blade of the bracket [B] into the slot.

14. Fasten the sensor bracket [A], and then close the clamp.

15. Thread the harness through the three clamps [B] and then close them.

16. Set the upper guide as shown, and then gather these items from the accessories.

[A] Shielded harnesses

[B] Double-feed sensor 2

[C] Screws (M3x8)

17. Connect the harness to the sensor board [A].