Ricoh S7 D3DS Manual de serviço de campo - Página 14
Procurar online ou descarregar pdf Manual de serviço de campo para Acessórios para impressoras Ricoh S7 D3DS. Ricoh S7 D3DS 23 páginas. Double-feed kit
Imprimir página
1.Install
12. Hold double-feed sensor 1 as shown [A], and then connect the harness.
13. Insert the blade of the bracket [B] into the slot.
14. Fasten the sensor bracket [A], and then close the clamp.
15. Thread the harness through the three clamps [B] and then close them.
16. Set the upper guide as shown, and then gather these items from the accessories.
[A] Shielded harnesses
[B] Double-feed sensor 2
[C] Screws (M3x8)
17. Connect the harness to the sensor board [A].
12