Cisco SG 300-10P Manuel de démarrage rapide - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco SG 300-10P. Cisco SG 300-10P 17 pages. Managed switches
Également pour Cisco SG 300-10P : Fiche technique (14 pages), Spécifications (2 pages), Manuel d'installation rapide (10 pages), Manuel de démarrage rapide (18 pages), Manuel de démarrage rapide (17 pages), Manuel de démarrage rapide (17 pages)

Back Panel

The power port and console port are located on the back panel of the

managed switch.

Power—The Power port is where you will connect the switch to power.

Console—The Console port is where you can connect a serial cable to a

computers serial port for configuration using a terminal emulation program.

Returning the Device to the Factory

Default Settings

To use the

Reset

following:

• To reboot the managed switch, press the

seconds.

• To restore the managed switch configuration to the factory default

settings:

1. Disconnect the managed switch from the network or disable all

DHCP servers on your network.

2. With the power on, press-and-hold the

10 seconds.

300 Series Managed Switches

button to reboot or reset the managed switch, do the

Reset

button for less than 10

Reset

button for more than