Cisco SG 300-10P 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Cisco SG 300-10P에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SG 300-10P 17 페이지. Managed switches
Cisco SG 300-10P에 대해서도 마찬가지입니다: 데이터시트 (14 페이지), 사양 (2 페이지), 빠른 설정 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄
- 1. Quick Start Guide
- 2. Mounting the Cisco Switch
- 3. Wall Mounting
- 4. Rack-Mount Placement
- 5. Connecting Network Devices
- 6. Power over Ethernet (Poe) Considerations
- 7. Managing Switch Using Web-Based Interface
- 8. Troubleshoot Your Connection
- 9. Front Panel Ports
- 10. Front Panel Leds
- 11. Additional Front Panel Features
- 12. Back Panel
- 13. Where to Go from here
Back Panel
The power port and console port are located on the back panel of the
managed switch.
Power—The Power port is where you will connect the switch to power.
Console—The Console port is where you can connect a serial cable to a
computers serial port for configuration using a terminal emulation program.
Returning the Device to the Factory
5
Default Settings
To use the
Reset
following:
• To reboot the managed switch, press the
seconds.
• To restore the managed switch configuration to the factory default
settings:
1. Disconnect the managed switch from the network or disable all
DHCP servers on your network.
2. With the power on, press-and-hold the
10 seconds.
300 Series Managed Switches
button to reboot or reset the managed switch, do the
Reset
button for less than 10
Reset
button for more than
11