Cisco SG 300-10P 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Cisco SG 300-10P에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SG 300-10P 17 페이지. Managed switches
Cisco SG 300-10P에 대해서도 마찬가지입니다: 데이터시트 (14 페이지), 사양 (2 페이지), 빠른 설정 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄

Welcome

Thank you for choosing the Cisco 300 Series Managed Switch, a Cisco

Small Business network communications device. This device is designed

to be operational right out of the box as a standard bridge. In the default

configuration, it will forward packets between connecting devices after

power up.

Package Contents

• Cisco SF 300-08, SF 302-08, SF 302-08MP, SF 302-08P, SG 300-10,

SG 300-10MP, SG 300-10P, SG 300-20, SF 300-24, SF 300-24P, SG

300-28, SG 300-28P, SF 300-48, SF 300-48P, or SG 300-52 Managed

Switch

• Rackmount Kit

• Wall Mount Kit

• Power Cord (power adapter included with 8-port devices)

• This Quick Start Guide

• Product CD

• Serial Cable

• Rubber Feet

This guide will familiarize you with the layout of the managed switch and

describe how to deploy the device in your network. For additional

information, see www.cisco.com/smb.

Mounting the Cisco Switch

There are three ways to physically install the switch:

• Set the switch on a flat surface.

• Mount the switch on a wall (8-port devices only).

• Mount the switch in a standard rack (1 rack unit high).

Do not deploy the device in a location where any of the following

conditions exist:

High Ambient Temperature—The ambient temperature must not

exceed 104 degrees Fahrenheit (40 degrees Centigrade).

Reduced Air Flow—Both side panels must be unobstructed to prevent

overheating.

300 Series Managed Switches