DigitaLinx DL-HD2-RX Manuel d'installation rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} DigitaLinx DL-HD2-RX. DigitaLinx DL-HD2-RX 8 pages.
Également pour DigitaLinx DL-HD2-RX : Manuel du propriétaire (13 pages)

Imprimer la page

Connectivity Instructions

1. Verify all components included with the extender set are present before

installation.

2. Turn off power and disconnect the audio/video equipment by following the

manufacturer's instructions.

3. Connect Category 6 or greater twisted pair cable with RJ45 connectors between

the transmitter (DL-1H1V1U-WP-W, sold separately) and the DL-HD2-RX receivers

HDBaseT ports. TIA/EIA-568B straight-through wiring connections must be used

with all HDBaseT extenders.

4. Connect an HDMI cable between the display device and the DL-HD2-RX receiver.

5. Connect USB cables between the USB hub to USB devices (optional).

6. Connect an RS232 cable between the DL-HD2-RX and the RS232 port of a

display device (optional).

7. Connect the power supply adapter to the DL-HD2-RX receiver locking input port

and plug into an AC outlet.

8. Power on attached audio/video and USB devices.