DigitaLinx DL-HD2-RX Manuale di installazione rapida - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione rapida per Ricevitore DigitaLinx DL-HD2-RX. DigitaLinx DL-HD2-RX 8.
Anche per DigitaLinx DL-HD2-RX: Manuale d'uso (13 pagine)
Stampa la paginaConnectivity Instructions
1. Verify all components included with the extender set are present before
installation.
2. Turn off power and disconnect the audio/video equipment by following the
manufacturer's instructions.
3. Connect Category 6 or greater twisted pair cable with RJ45 connectors between
the transmitter (DL-1H1V1U-WP-W, sold separately) and the DL-HD2-RX receivers
HDBaseT ports. TIA/EIA-568B straight-through wiring connections must be used
with all HDBaseT extenders.
4. Connect an HDMI cable between the display device and the DL-HD2-RX receiver.
5. Connect USB cables between the USB hub to USB devices (optional).
6. Connect an RS232 cable between the DL-HD2-RX and the RS232 port of a
display device (optional).
7. Connect the power supply adapter to the DL-HD2-RX receiver locking input port
and plug into an AC outlet.
8. Power on attached audio/video and USB devices.