DigitaLinx DL-HD2-RX 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} DigitaLinx DL-HD2-RX에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-HD2-RX 8 페이지.
DigitaLinx DL-HD2-RX에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지)

페이지 인쇄

Connectivity Instructions

1. Verify all components included with the extender set are present before

installation.

2. Turn off power and disconnect the audio/video equipment by following the

manufacturer's instructions.

3. Connect Category 6 or greater twisted pair cable with RJ45 connectors between

the transmitter (DL-1H1V1U-WP-W, sold separately) and the DL-HD2-RX receivers

HDBaseT ports. TIA/EIA-568B straight-through wiring connections must be used

with all HDBaseT extenders.

4. Connect an HDMI cable between the display device and the DL-HD2-RX receiver.

5. Connect USB cables between the USB hub to USB devices (optional).

6. Connect an RS232 cable between the DL-HD2-RX and the RS232 port of a

display device (optional).

7. Connect the power supply adapter to the DL-HD2-RX receiver locking input port

and plug into an AC outlet.

8. Power on attached audio/video and USB devices.