Cisco Profile Series Manuel de configuration - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco Profile Series. Cisco Profile Series 13 pages. Jbod on the 12g sas modular raid controller
Également pour Cisco Profile Series : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (7 pages), Manuel de démarrage (35 pages), Manuel de référence rapide (2 pages), Manuel d'installation (44 pages), Fiche d'installation (2 pages), Manuel d'installation (2 pages), Manuel de démarrage rapide (4 pages), Manuel de démarrage rapide (4 pages), Manuel d'installation (16 pages), Manuel de démarrage (32 pages), Manuel (16 pages), Manuel de démarrage (42 pages), Manuel de démarrage (46 pages)

Imprimer la page
Cisco Profile Series Manuel de configuration
Information About Configuring Serial Interfaces
When an interface is configured with PPP encapsulation, a link is declared down and full LCP
Note
negotiation is re-initiated after five echo request (ECHOREQ) packets are sent without receiving an echo
response (ECHOREP).
PPP provides the following Network Control Protocols (NCPs) for negotiating properties of data
protocols that will run on the link:
IP Control Protocol (IPCP) to negotiate IP properties
•
Multiprotocol Label Switching control processor (MPLSCP) to negotiate MPLS properties
•
Cisco Discovery Protocol control processor (CDPCP) to negotiate CDP properties
•
•
IPv6CP to negotiate IP Version 6 (IPv6) properties
•
Open Systems Interconnection control processor (OSICP) to negotiate OSI properties
Cisco 800M Series Integrated Services Routers Software Configuration Guide
42
Chapter 4
Configuring the Serial Interface