Cisco Profile Series Configuratiehandleiding - Pagina 4

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco Profile Series. Cisco Profile Series 13 pagina's. Jbod on the 12g sas modular raid controller
Ook voor Cisco Profile Series: Aan de slag handleiding (41 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (7 pagina's), Aan de slag handleiding (35 pagina's), Snelle referentiehandleiding (2 pagina's), Installatiehandleiding (44 pagina's), Installatieblad (2 pagina's), Installatiehandleiding (2 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Handleiding installeren (16 pagina's), Aan de slag handleiding (32 pagina's), Handmatig (16 pagina's), Aan de slag handleiding (42 pagina's), Aan de slag handleiding (46 pagina's)

Information About Configuring Serial Interfaces

When an interface is configured with PPP encapsulation, a link is declared down and full LCP

Note

negotiation is re-initiated after five echo request (ECHOREQ) packets are sent without receiving an echo

response (ECHOREP).

PPP provides the following Network Control Protocols (NCPs) for negotiating properties of data

protocols that will run on the link:

IP Control Protocol (IPCP) to negotiate IP properties

•

Multiprotocol Label Switching control processor (MPLSCP) to negotiate MPLS properties

•

Cisco Discovery Protocol control processor (CDPCP) to negotiate CDP properties

•

IPv6CP to negotiate IP Version 6 (IPv6) properties

•

Open Systems Interconnection control processor (OSICP) to negotiate OSI properties

Cisco 800M Series Integrated Services Routers Software Configuration Guide

Chapter 4

Configuring the Serial Interface