Cisco Profile Series Panduan Konfigurasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Sistem Konferensi Cisco Profile Series. Cisco Profile Series 13 halaman. Jbod on the 12g sas modular raid controller
Juga untuk Cisco Profile Series: Panduan Memulai (41 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (7 halaman), Panduan Memulai (35 halaman), Panduan Referensi Cepat (2 halaman), Panduan Instalasi (44 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (4 halaman), Panduan Instalasi (16 halaman), Panduan Memulai (32 halaman), Manual (16 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

Cisco Profile Series Panduan Konfigurasi
Information About Configuring Serial Interfaces
When an interface is configured with PPP encapsulation, a link is declared down and full LCP
Note
negotiation is re-initiated after five echo request (ECHOREQ) packets are sent without receiving an echo
response (ECHOREP).
PPP provides the following Network Control Protocols (NCPs) for negotiating properties of data
protocols that will run on the link:
IP Control Protocol (IPCP) to negotiate IP properties
Multiprotocol Label Switching control processor (MPLSCP) to negotiate MPLS properties
Cisco Discovery Protocol control processor (CDPCP) to negotiate CDP properties
IPv6CP to negotiate IP Version 6 (IPv6) properties
Open Systems Interconnection control processor (OSICP) to negotiate OSI properties
Cisco 800M Series Integrated Services Routers Software Configuration Guide
42
Chapter 4
Configuring the Serial Interface