Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Note d'installation (46 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages), Note d'installation (36 pages)

Upgrading the DRAM DIMM

Figure 4

Hold the DIMM by its edges, gently lift and remove it, and place it on an antistatic mat or foam.

Step 2

(See

Figure

Figure 5

DIMMs are sensitive components that are susceptible to ESD damage. To prevent ESD damage, handle

Caution

DIMMs by the edges only; avoid touching the memory modules, pins, or traces (the metal fingers along

the connector edge of the DIMM). (See

Step 3

Remove one upgrade DIMM from the antistatic container.

Step 4

Hold the DIMM by its edges. (See

Step 5

Tilt the DIMM to approximately the same angle as the socket, and insert the connector edge into the

socket. Note the notch (key) on the right connector edge of the DIMM. (See

correct orientation of the DIMM in the socket.

The Supervisor Engine 1A DRAM uses two DIMMs, one stacked on top of the other. Install the lower

Note

DIMM first.

When inserting the DIMM, use firm but not excessive pressure. If you damage a socket, you will have

Caution

to return the supervisor engine to Cisco for repair.

Catalyst 6500 Series Supervisor Engine 1A DRAM Upgrade Installation Note

Removing the DRAM DIMM

5.)

Handling a DIMM

Figure

5.)

Figure

5.) This key assures

78-14357-02