ACU-RITE SENC 150 Manuel d'instructions - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} ACU-RITE SENC 150. ACU-RITE SENC 150 12 pages. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Également pour ACU-RITE SENC 150 : Manuel d'installation (8 pages), Manuel de référence (20 pages), Manuel d'installation (4 pages), Manuel d'installation (6 pages)

Imprimer la page

6 Inserting the reading head

Insertion tool
 Remove tape keeping the reading head contained within the
insertion tool.
Aligning of insertion tool and scale
glass scale
insertion tool
 Note the orientation of the reading head to the insertion tool.
The insertion tool and the reading head have to be in alignment.
8
SENC 150 Reading Head Replacement Instructions
Inserting the tool
 Push the tool into the end of the scale case until it is stopped
by the blade touching the glass.
 Gently slide the reading head assembly onto the scale glass
from the tool. Do not force the reading head; it will glide
smoothly.
 If resistance is felt, ensure that the tool is inserted correctly
into the end of the encoder case.
Inserting the reading head
 Slide the reading head gently to the center of the scale
case and remove the insertion tool.