ACU-RITE SENC 150 사용 설명서 - 페이지 8

{카테고리_이름} ACU-RITE SENC 150에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE SENC 150 12 페이지. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
ACU-RITE SENC 150에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 참조 매뉴얼 (20 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (6 페이지)

페이지 인쇄

6 Inserting the reading head

Insertion tool

 Remove tape keeping the reading head contained within the

insertion tool.

Aligning of insertion tool and scale

glass scale

insertion tool

 Note the orientation of the reading head to the insertion tool.

The insertion tool and the reading head have to be in alignment.

SENC 150 Reading Head Replacement Instructions

Inserting the tool

 Push the tool into the end of the scale case until it is stopped

by the blade touching the glass.

 Gently slide the reading head assembly onto the scale glass

from the tool. Do not force the reading head; it will glide

smoothly.

 If resistance is felt, ensure that the tool is inserted correctly

into the end of the encoder case.

Inserting the reading head

 Slide the reading head gently to the center of the scale

case and remove the insertion tool.