Cisco Gigabit Switch Router Cisco 12012 Manuel d'instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 14 pages. Gigabit switch router cablemanagement kit
Également pour Cisco Gigabit Switch Router Cisco 12012 : Manuel d'instructions de remplacement (34 pages), Manuel d'instructions de remplacement (6 pages), Fiche technique (9 pages), Manuel d'instructions de remplacement (20 pages)

Proceeding from the bottom port on the line card (for line cards with multiple ports only),

Step 3

disconnect the network interface cable from the each port on the line card. (Refer to

Figure 4a.)

Carefully remove the interface cable from the vertical cable-management bracket clips.

Step 4

(Refer to Figure 4b.)

Step 5

Carefully remove the interface cable from the vertical cable-management bracket clip

nearest the line card port. (Refer to Figure 4c.) Set the interface cable aside.

Repeat Step 3 through Step 5 for the rest of the interface cables attached to the line card.

Figure 4

Removing the Cables From a Vertical Cable-Management Bracket

Chassis

cable-management

tray

Line card

cable-management

bracket

Interface

cable

Cisco 12012 Gigabit Switch Router Cable- Management Kit Installation Instructions

Removing and Replacing the Cable-Management System

Cable clip Cable clips