Cisco Gigabit Switch Router Cisco 12012 설치 지침 매뉴얼 - 페이지 9
{카테고리_이름} Cisco Gigabit Switch Router Cisco 12012에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Gigabit Switch Router Cisco 12012 14 페이지. Gigabit switch router cablemanagement
kit
Cisco Gigabit Switch Router Cisco 12012에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (34 페이지), 교체 지침 매뉴얼 (6 페이지), 데이터시트 (9 페이지), 교체 지침 매뉴얼 (20 페이지)
페이지 인쇄
Proceeding from the bottom port on the line card (for line cards with multiple ports only),
Step 3
disconnect the network interface cable from the each port on the line card. (Refer to
Figure 4a.)
Carefully remove the interface cable from the vertical cable-management bracket clips.
Step 4
(Refer to Figure 4b.)
Step 5
Carefully remove the interface cable from the vertical cable-management bracket clip
nearest the line card port. (Refer to Figure 4c.) Set the interface cable aside.
Repeat Step 3 through Step 5 for the rest of the interface cables attached to the line card.
Figure 4
Removing the Cables From a Vertical Cable-Management Bracket
Chassis
cable-management
tray
a
Line card
cable-management
bracket
Interface
cable
Cisco 12012 Gigabit Switch Router Cable- Management Kit Installation Instructions
Removing and Replacing the Cable-Management System
b
Cable clip Cable clips
c
9