Cisco Physical Access 1125 Appliance Manuel de l'utilisateur - Page 30
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42 pages.
Imprimer la page
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-10
2
The following items are called out in
1
2
Installing the Chassis in the Rack
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an appropriate lifting
Caution
device. A fully loaded Cisco PAM appliance weighs approximately 14 kg (31 lbs.).
Locate one person at the front of the rack and one at the rear.
Step 1
Position the chassis so that the L brackets (see item 1 in
Step 2
chassis mounting brackets (see item 2 in
While one person supports the weight of the chassis from the rear, the other person must adjust the L
Step 3
brackets to fit tightly into the chassis brackets (see item 3 in
Cisco Physical Access 1125 Appliance User Guide
3-12
Attaching an L Bracket to a Center Post
1
L bracket
Rack screw
Chapter 3
3
Figure
3-10:
3
Front side of right center post
Figure 3-11 on page
Figure 3-11 on page
3-13).
Figure 3-11 on page
Rack Mounting the Cisco PAM 1125 Appliance
3-13) are inserted into the
3-13).
OL-20929-01