Cisco Physical Access 1125 Appliance Podręcznik użytkownika - Strona 30
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt sieciowy Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42 stron.
Drukuj stronę
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-10
2
The following items are called out in
1
2
Installing the Chassis in the Rack
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an appropriate lifting
Caution
device. A fully loaded Cisco PAM appliance weighs approximately 14 kg (31 lbs.).
Locate one person at the front of the rack and one at the rear.
Step 1
Position the chassis so that the L brackets (see item 1 in
Step 2
chassis mounting brackets (see item 2 in
While one person supports the weight of the chassis from the rear, the other person must adjust the L
Step 3
brackets to fit tightly into the chassis brackets (see item 3 in
Cisco Physical Access 1125 Appliance User Guide
3-12
Attaching an L Bracket to a Center Post
1
L bracket
Rack screw
Chapter 3
3
Figure
3-10:
3
Front side of right center post
Figure 3-11 on page
Figure 3-11 on page
3-13).
Figure 3-11 on page
Rack Mounting the Cisco PAM 1125 Appliance
3-13) are inserted into the
3-13).
OL-20929-01