Cisco IC3000 Manuel d'installation du matériel - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco IC3000. Cisco IC3000 37 pages. Industrial compute gateway
Également pour Cisco IC3000 : Documentation sur les produits (12 pages)
Imprimer la page
Installing the Cisco IC3000 Industrial Compute Gateway
Step 1
Use a standard Phillips screwdriver or a ratcheting torque screwdriver with a Phillips head to remove the ground screw
from the front panel of the device. Store the ground screw for later use.
Step 2
Use a wire stripping tool to strip the 16 AWG (1.5mm2) grounding wire to 0.22 in. (5.56 mm).
Step 3
Crimp the ground wire to the ring terminal using the wire crimper. See the following figure.
Figure 5: Crimping the Ring Terminal
Step 4
Slide the ground screw through the terminal.
Step 5
Insert the ground screw into the functional ground screw opening on the front panel.
Step 6
Attach the ring terminal to the chassis using the screw set aside in step 1. Use a ratcheting torque screwdriver to tighten
the ground screws and ring terminal to the device front panel to 3.5 in-lb (0.4 N-m). See item (1) in the following figure.
Cisco IC3000 Industrial Compute Gateway Hardware Installation Guide
Installing the Cisco IC3000 Ground Connection
21