Cisco IC3000 하드웨어 설치 매뉴얼 - 페이지 23

{카테고리_이름} Cisco IC3000에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IC3000 37 페이지. Industrial compute gateway
Cisco IC3000에 대해서도 마찬가지입니다: 제품 문서 (12 페이지)

페이지 인쇄

1. Initial Configuration

Installing the Cisco IC3000 Industrial Compute Gateway

Step 1

Use a standard Phillips screwdriver or a ratcheting torque screwdriver with a Phillips head to remove the ground screw

from the front panel of the device. Store the ground screw for later use.

Step 2

Use a wire stripping tool to strip the 16 AWG (1.5mm2) grounding wire to 0.22 in. (5.56 mm).

Step 3

Crimp the ground wire to the ring terminal using the wire crimper. See the following figure.

Figure 5: Crimping the Ring Terminal

Step 4

Slide the ground screw through the terminal.

Step 5

Insert the ground screw into the functional ground screw opening on the front panel.

Step 6

Attach the ring terminal to the chassis using the screw set aside in step 1. Use a ratcheting torque screwdriver to tighten

the ground screws and ring terminal to the device front panel to 3.5 in-lb (0.4 N-m). See item (1) in the following figure.

Cisco IC3000 Industrial Compute Gateway Hardware Installation Guide

Installing the Cisco IC3000 Ground Connection