Cisco MERAKI MR66 Manuel d'installation - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco MERAKI MR66. Cisco MERAKI MR66 20 pages. Troubleshooting mesh communication between access points
Également pour Cisco MERAKI MR66 : Manuel (7 pages)
Imprimer la page
- 1. Package Contents
- 2. Understanding the MR66
- 3. Antennas and Ports
- 4. Pre-Install Preparation
- 5. Power Source Options
- 6. Factory Reset Button
- 7. Led Indicators and Run Dark Mode
- 8. Check and Upgrade Firmware
- 9. Collect Tools
- 10. Collect Additional Hardware for Installation
- 11. Installation Instructions
- 12. Choose Your Mounting Location
- 13. Verify Device Functionality and Test Network Coverage
- 14. Troubleshooting
- 15. Regulatory Information for MR66
Powering the MR66 with an 802.3af Power over Ethernet Switch
Route Ethernet cable from a port on an active 802.3af PoE switch to the Eth0 port in the bay of the MR66. The MR66 is
Gigabit Ethernet-capable. To maximize device performance, a Gigabit-capable switch should be used.
Attach Power over Ethernet to the MR66
1. Remove the dust cover from the Ethernet port of the MR66. Unscrew it with a coin or flathead screwdriver.
2. Route the Ethernet cable from the PoE Injector "OUT" port to the MR66.
3. Install a Cable Gland on the MR66 end of the cable.
13