Cisco MERAKI MR66 Installationshandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Installationshandbuch für Gateway Cisco MERAKI MR66 herunter. Cisco MERAKI MR66 20 Seiten. Troubleshooting mesh communication between access points
Auch für Cisco MERAKI MR66: Handbuch (7 seiten)
Seite drucken
- 1. Package Contents
- 2. Understanding the MR66
- 3. Antennas and Ports
- 4. Pre-Install Preparation
- 5. Power Source Options
- 6. Factory Reset Button
- 7. Led Indicators and Run Dark Mode
- 8. Check and Upgrade Firmware
- 9. Collect Tools
- 10. Collect Additional Hardware for Installation
- 11. Installation Instructions
- 12. Choose Your Mounting Location
- 13. Verify Device Functionality and Test Network Coverage
- 14. Troubleshooting
- 15. Regulatory Information for MR66
Powering the MR66 with an 802.3af Power over Ethernet Switch
Route Ethernet cable from a port on an active 802.3af PoE switch to the Eth0 port in the bay of the MR66. The MR66 is
Gigabit Ethernet-capable. To maximize device performance, a Gigabit-capable switch should be used.
Attach Power over Ethernet to the MR66
1. Remove the dust cover from the Ethernet port of the MR66. Unscrew it with a coin or flathead screwdriver.
2. Route the Ethernet cable from the PoE Injector "OUT" port to the MR66.
3. Install a Cable Gland on the MR66 end of the cable.
13